**Wet well**

Wet well type. This calculator supports circular and rectangular configurations.

**X-dimension**

For a circular wet well, enter the diameter, for a rectangular wet well
enter one of the horizontal dimensions.

**Y-dimension**

For a rectangular configuration enter the other horizontal dimension.
For a circular configuration this parameter is ignored.

**Depth**

This is the verticle distance between ON and OFF floats.

**Calculated flow rate**

If you use a program like Horton Engineering Station Data or GrafTACs
the influent flow rate is calculated for each fill cycle.
This parameter is optional.

**Time of Calculation**

Enter the time of the influent flow. The value may have a decimal or a color.
Thus if the pumps started at 8:30am you can enter 8.5 or 8:30. If this value
is entered the starting fill time will be computed. This parameter is optional.